| P
R O
D
U C T S |
AUTOMATIC
PLANER / Dynamik Series |
LSM-510
LSM-630
LSM-660
LSM-760
LSM-850 |
|
LSM-510
/ LSM-630 /
LSM-660 / LSM-760 / LSM-850
The
NEW Dynamik Series planer is designed and built for productivity,
quality and profit.
MODEL
IDENTIFICATION
|
|
| |
OUTSTANDING
FEATURES: |
| |
- Powerful
cutterhead motor.
- Variable
feed speed is driven by a DC motor. Speed range 0-90 ft/min.
- Digital
position controller for convenient thickness setting / automatic
positioning.
- Ruggedly
constructed throughout - machine weight 2,360 lbs.
- Spiral
cutterhead provides high chip removal rate, superior surface
finish and low noise level.
- Precision
cutterhead ball bearings.
- Heavy
duty cast iron table is heat treated and precision ground.
- Powered
table elevation for fast and convenient thickness setting
is standard.
- Additional
emergency stop switch provided at back side of the machine.
- Two
Ø
1-1/2" jack screws provide solid support of table.
- Corrugated
sectional infeed roller has independent movement for running
strip stock of varying thicknesses. Improves safety.
- Anti-kickback
fingers equipped at the infeed end provide added safety
for the operator.
- Feed
speed and DC motor RPM meters provided on the front control
panel.
- Adjustable
bed rollers for planing of rough or finished lumber or glued
panels.
|
|
| |
LCE
certified. Spiral cutterhead. Digital position control. Variable feed
rate.
Powered table rollers. Fully enclosed top guard.
 |
QUICKLY
ADJUSTED TABLE ROLLERS
The
table is equipped with two powered rollers, allowing for smooth
feeding of moisturized or warped stock. Both rollers are quickly
adjusted by means of a quick setting lever at the front of the
machine. Table rollers are raised or lowered synchronizely through
a linkage between rollers. |
| |
 |
ELECTRICAL
CONTROL CIRCUIT
The electrical control system employs high quality components
for dependable motion controls and long service life. Electronic
components are CSA, UL or CE approved and are carefully laid
out for easy maintenance. |
 |
POWERFUL DUST SUCTION
Fully enclosed top guard combined with a big opening provides
increased dust extraction performance. The dust hood - with
6" diameter outlet - is provided at the outfeed end of
the planer for connection to the dust collection system. |
| |
 |
ADDITIONAL EMERGENCY STOP SWITCH
The planer is equipped with two emergency stop switches. One is
provided on the control panel, the other one (picture shown) is
provided at the outfeed end of the machine for added safety
control. |
 |
CONVENIENT ADJUSTMENT
Adjustment screws for the feeding mechanism including infeed and
outfeed rollers, front and rear pressure plates, are easy to
access providing convenient adjustment. |
| |
 |
SPIRAL CUTTERHEAD (opt.)
The planer is equipped with an oversized spiral cutterhead. This
provides high chip removal rate, superior surface finish and
extremely low noise while cutting. Manufactured from alloy
steel, the spiral cutterhead is precision machined, tempered,
dynamically balanced and precision ground. Four-edge Tungsten
carbide knife inserts are fitted in the helical slots of the
cutterhead. (15 x 15 x 2.5mm solid carbide knives)
QUICK CHANGE STRAIGHT KNIFE CUTTERHEAD
The safety type quick change straight knife cutterhead is
machined from mild carbon steel. Changing of knife inserts is
quickly and conveniently accomplished by simply loosening the
gib set screws and tapping them down. The cutterhead is fitted
with 4 high speed steel knives. T.C.T. knives are optional. |
|
|
SPECIFICATIONS: |
| |
| MODEL |
LSM-510
|
LSM-630 |
LSM-660 |
|
Table
area |
36"x21"
(915x534mm) |
36"x25"
(915x635mm) |
38"x27"
(965x685mm) |
|
Cutterhead
diameter |
3.86" (98mm) |
|
Cutting
circle |
4" (101mm) |
|
Cutterhead
speed |
Spiral |
5500 rpm |
|
Stright |
4500 rpm |
|
Spiral raw numbers |
6 |
|
Number of straight knives |
4 |
|
Knife insert size |
15x15x2.5mm |
|
Feed
rollers |
3" (75mm) |
|
Table
rollers |
2-1/2"
(65mm) |
|
Range
of feed speed |
0-25 meter/min |
|
Maximum
depth of cut |
5/16" (8mm) |
|
Stock
thickness range |
1/4"-8"
(6-203mm) |
|
Maximum
width of stock |
20" (508mm) |
24" (609mm) |
26" (660mm) |
|
Cutterhead
motor |
10 HP |
15 HP |
20 HP |
|
Feed
drive motor |
1 HP |
2 HP |
2 HP |
|
Net
weight |
800 kgs |
900 kgs |
1050 kgs |
|
Gross
weight |
900 kgs |
1000 kgs |
1150 kgs |
|
Packing
dimensions |
44"x40"x53"
(1117x1016x1346mm) |
48"x45"x54"
(1220x1143x1372mm) |
52"x46"x57"
(1320x1168x1448mm) |
| MODEL |
LSM-760 |
LSM-850 |
|
Table
area |
38"x31"
(965x787mm) |
38"x34-1/2"
(965x876mm) |
|
Cutterhead
diameter |
3.86" (98mm) |
|
Cutting
circle |
4" (101mm) |
|
Cutterhead
speed |
Spiral |
5500 rpm |
|
Stright |
4500 rpm |
|
Spiral raw numbers |
6 |
|
Number of straight knives |
4 |
|
Knife insert size |
15x15x2.5mm |
|
Feed
rollers |
3" (75mm) |
|
Table
rollers |
2-1/2"
(65mm) |
|
Range
of feed speed |
0-25 meter/min |
|
Maximum
depth of cut |
5/16" (8mm) |
|
Stock
thickness range |
1/4"-8"
(6-203mm) |
|
Maximum
width of stock |
30" (760mm) |
331/2"
(850mm) |
|
Cutterhead
motor |
20 HP |
25 HP |
|
Feed
drive motor |
2 HP |
2 HP |
|
Net
weight |
1250 kgs |
1450 kgs |
|
Gross
weight |
1350 kgs |
1550 kgs |
|
Packing
dimensions |
56"x46"x57"
(1422x1168x1448mm) |
61"x46"x57"
(1550x1168x1448mm) |
*
Specifications and design characteristics are subject to change without
prior notice.
|
| STANDARD
EQUIPMENT: |
1. Powered table elevation
2. Digital table positioning controls
3. Anti-kickback fingers
4. Sectional infeed rollers (Double)
5. Spiral cutterhead (Solid steel)
6. 15 x 15 x 2.5mm knife inserts (Solid carbide)
7. Operations and parts book
8. Tool Box / Service kit |
| |
CHEN
SHENG MACHINERY INDUSTRIAL CO., LTD.
NO3, ALY 1, LN .198,SEC2,. SANFENG RD., FENGYUAN DIST., TAICHUNG CITY 420079, TAIWAN.
TEL:886-4-25221371 . 25228106 FAX:886-4-25241931 skype: chensheng07
|
