P R O D U C T S AUTOMATIC PLANER / Dynforce Series
LSF-510
LSF-630
LSF-660
LSF-760
LSF-850


 

LSF-510 / LSF-630 /
LSF-660 / LSF-760 / LSF-850

Production Series
High Speed Single Head Finish Planer
Spiral cutterhead. Digital position control.

Variable feed rate driven by DC motor. 25 M/min. feed rate. Ruggedly constructed throughout.

MODEL IDENTIFICATION


  OUTSTANDING FEATURES:
 
  • Powerful cutterhead motor.
  • Variable feed speed is driven by a DC motor. Speed range 0-90 ft/min.
  • Digital position controller for convenient thickness setting / automatic positioning.
  • Ruggedly constructed throughout - machine weight 2,360 lbs.
  • Spiral cutterhead provides high chip removal rate, superior surface finish and low noise level.
  • Precision cutterhead ball bearings.
  • Heavy duty cast iron table is heat treated and precision ground.
  • Powered table elevation for fast and convenient thickness setting is standard.
  • Additional emergency stop switch provided at back side of the machine.
  • Two Ø 1-1/2" jack screws provide solid support of table.
  • Corrugated sectional infeed roller has independent movement for running strip stock of varying thicknesses, Improves safety.
  • Anti-kickback fingers equipped at the infeed end provide added safety for the operator.
  • Feed speed and DC motor RPM meters provided on the front controls panel.
  • Adjustable bed rollers for planing of rough or finished lumber or glued panels.
 
QUICKLY ADJUSTED TABLE ROLLERS
The table is equipped with two powered rollers, allowing for smooth feeding of moisturized or warped stock. Both rollers are quickly adjusted by means of a quick setting lever at the front of the machine. Table rollers are raised or lowered synchronizely through a linkage between rollers.
  ADDITIONAL EMERGENCY STOP SWITCH
The planer is equipped with two emergency stop switches. One is provided on the control panel, the other one (picture shown) is provided at the outfeed end of the machine for added safety control.
ELECTRICAL CONTROL CIRCUIT
The electrical control system employs high quality components for dependable motion controls and long service life. Electronic components are CSA, UL or CE approved and are carefully laid out for easy maintenance.
  CONVENIENT CHIP BREAKER ADJUSTMENT
All adjustment screws for the chip breaker are located on the top for easy accessibility providing convenient adjustment.

ELECTRICAL CONTROL PANEL
All motion controls of the planer are located at an easily accessible position. A digital position controller equipped on the control panel provides convenient thickness setting. Feed speed can be read on the control panel, and can be adjusted by simply turning a regulator knob.
 
POWERFUL CUTTERHEAD DRIVE MOTOR
The cutterhead is driven by a 20HP motor, permitting heavy-duty cutting. Motor horsepower is fully transmitted to the cutterhead through three V-belts.
FEED DRIVE ASSEMBLY
The feed speed is infinitely variable from 0 to 25 meters per minute to suit all types of stock. Feed drive assembly is a combination of high performance DC motor, V-belts and heavy pitch gears providing smooth and accurate feeding performance.

SPECIFICATIONS:
 
MODEL

LSF-510

LSF-630 LSF-660
Table area 36"x21"
(915x534mm)
36"x25"
(915x635mm)
38"x27"
(965x685mm)
Cutterhead diameter 3.86" (98mm)
Cutting circle 4" (101mm)
Cutterhead speed Spiral 5500 rpm
Stright 4500 rpm
Spiral raw numbers 6
Number of straight knives 4
Knife insert size 15x15x2.5mm
Feed rollers 3" (75mm)
Table rollers 2-1/2" (65mm)
Range of feed speed 0-25 meters/min
Maximum depth of cut 5/16" (8mm)
Stock thickness range 1/4"-8" (6-203mm)
Maximum width of stock 20" (508mm) 24" (609mm) 26" (660mm)
Cutterhead motor 10 HP 15 HP 20 HP
Feed drive motor 1 HP 2 HP 2 HP
Net weight 800 kgs 900 kgs 1050 kgs
Gross weight 900 kgs 1000 kgs 1150 kgs
Packing dimensions 44"x40"x53"
(1117x1016x1346mm)
48"x45"x54"
(1220x1143x1372mm)
52"x46"x57"
(1320x1168x1448mm)

MODEL LSF-760 LSF-850
Table area 38"x31"
(965x787mm)
38"x34-1/2"
(965x876mm)
Cutterhead diameter 3.86" (98mm)
Cutting circle 4" (101mm)
Cutterhead speed Spiral 5500 rpm
Stright 4500 rpm
Spiral raw numbers 6
Number of straight knives 4
Knife insert size 15x15x2.5mm
Feed rollers 3" (75mm)
Table rollers 2-1/2" (65mm)
Range of feed speed 0-25 meter/min
Maximum depth of cut 5/16" (8mm)
Stock thickness range 1/4"-8" (6-203mm)
Maximum width of stock 30" (760mm) 33-1/2" (850mm)
Cutterhead motor 20 HP 25 HP
Feed drive motor 2 HP 2 HP
Net weight 1250 kgs 1450 kgs
Gross weight 1350 kgs 1550 kgs
Packing dimensions 56"x46"x57"
(1422x1168x1448mm)
61"x46"x57"
(1550x1168x1448mm)
* Specifications and design characteristics are subject to change without prior notice.

STANDARD EQUIPMENT:

1. Powered table elevation
2. Digital table positioning controls
3. Anti-kickback fingers
4. Sectional infeed rollers (Double)
5. Spiral cutterhead (Solid steel)
6. 15 x 15 x 2.5mm knife inserts (Solid carbide)
7. Operations and parts book
8. Tool Box / Service kit

 


CHEN SHENG MACHINERY INDUSTRIAL CO., LTD.
NO3, ALY 1, LN .198,SEC2,. SANFENG RD., FENGYUAN DIST., TAICHUNG CITY 420079, TAIWAN.
TEL:886-4-25221371 . 25228106    FAX:886-4-25241931    skype: chensheng07