| P
R O
D
U C T S |
AUTOMATIC
PLANER / LS-660 Series |
LS-510
LS-630
LS-660
LS-760
LS-850 |
|
LS-510
/ LS-630 /
LS-660 / LS-760 / LS-850
A heavy duty production planer integrating advanced features
at an economical price.
MODEL
IDENTIFICATION
|
|
| |
OUTSTANDING
FEATURES: |
| |
- Spiral
cutterhead provides high chip removal rate, superior surface
finish and low noise.
- Powerful
cutterhead motor makes this planer ideal for heavy duty
planing and meets high production requirements.
- Digital
positioning controller for convenient thickness setting.
- Variable feed
speed is driven by a DC motor.
- Powered table
elevation for fast and convenient thickness setting.
- Extra heavy,
rib reinforced cast iron table, surface precision ground.
- Corrugated
sectional infeed roller has independent yield for running
strip stock of varying thicknesses, Improves safety.
- Anti-kickback
fingers equipped at the infeed end provide added safety for
the operator.
- Raising and
lowering limit controls for powered table elevation.
|
|
| |
Spiral cutterhead. Digital position control. UL, CSA or CE approved
electrics.
Variable feed rate driven by DC motor. Powered table elevation.
 |
ELECTRICAL
CONTROL CIRCUIT
The electrical control system employs high quality components
for dependable motion controls and long service life. Electronic
components are CSA, UL or CE approved and are carefully laid out
for easy maintenance.
|
| |
 |
POWERFUL
CUTTERHEAD DRIVE MOTOR
The cutterhead is driven by a 20HP motor, permitting heavy-duty
cutting. Motor horsepower is fully transmitted to the cutterhead
through three V-belts. |
 |
FEED DRIVE
ASSEMBLY
The feed speed is infinitely variable from 0 to 25 meters per
minute to suit all types of stock. Feed drive assembly is a
combination of high performance DC motor, V-belts and heavy
pitch gears providing smooth and accurate feeding performance. |
| |
 |
ELECTRICAL
CONTROL PANEL
All motion controls of the planer are located at an easily accessible
position. A digital position controller equipped on the control
panel provides convenient thickness setting. Feed speed can
be read on the control panel, and can be adjusted by simply
turning a regulator knob. |
|
|
SPECIFICATIONS: |
| |
| MODEL |
LS-510
|
LS-630 |
LS-660 |
|
Table
area |
36"x21"
(915x534mm) |
36"x25"
(915x635mm) |
38"x27"
(965x685mm) |
|
Cutterhead
diameter |
3.86" (98mm) |
|
Cutting
circle |
4" (101mm) |
|
Cutterhead
speed |
Spiral |
5500 rpm |
|
Stright |
4500 rpm |
|
Spiral raw numbers |
6 |
|
Number of straight knives |
4 |
|
Knife insert size |
15x15x2.5mm |
|
Feed
rollers |
3" (75mm) |
|
Table
rollers |
2-1/2"
(65mm) |
|
Range
of feed speed |
0-25 meter/min |
|
Maximum
depth of cut |
5/16" (8mm) |
|
Stock
thickness range |
1/4"-8"
(6-203mm) |
|
Maximum
width of stock |
20" (508mm) |
24" (609mm) |
26" (660mm) |
|
Cutterhead
motor |
10 HP |
15 HP |
20 HP |
|
Feed
drive motor |
1 HP |
1 HP |
1 HP |
|
Net
weight |
800 kgs |
900 kgs |
1050 kgs |
|
Gross
weight |
900 kgs |
1000 kgs |
1150 kgs |
|
Packing
dimensions |
44"x40"x53"
(1117x1016x1346mm) |
48"x45"x54"
(1220x1143x1372mm) |
52"x46"x57"
(1320x1168x1448mm) |
| MODEL |
LS-760 |
LS-850 |
|
Table
area |
38"x31"
(965x787mm) |
38"x34-1/2"
(965x876mm) |
|
Cutterhead
diameter |
3.86" (98mm) |
|
Cutting
circle |
4" (101mm) |
|
Cutterhead
speed |
Spiral |
5500 rpm |
|
Stright |
4500 rpm |
|
Spiral raw numbers |
6 |
|
Number of straight knives |
4 |
|
Knife insert size |
15x15x2.5mm |
|
Feed
rollers |
3" (75mm) |
|
Table
rollers |
2-1/2"
(65mm) |
|
Range
of feed speed |
0-25 meter/min |
|
Maximum
depth of cut |
5/16" (8mm) |
|
Stock
thickness range |
1/4"-8"
(6-203mm) |
|
Maximum
width of stock |
30" (760mm) |
33-1/2"
(850mm) |
|
Cutterhead
motor |
20 HP |
25 HP |
|
Feed
drive motor |
1 HP |
1 HP |
|
Net
weight |
1250 kgs |
1450 kgs |
|
Gross
weight |
1350 kgs |
1550 kgs |
|
Packing
dimensions |
56"x46"x57"
(1422x1168x1448mm) |
61"x46"x57"
(1550x1168x1448mm) |
*
Specifications and design characteristics are subject to change without
prior notice.
|
| STANDARD
EQUIPMENT: |
|
1. Powered table elevation
2. Digital table positioning controls
3. Anti-kickback fingers
4. Sectional infeed rollers (Double)
5. Spiral cutterhead (Solid steel)
6. 15 x 15 x 2.5mm knife inserts (Solid carbide)
7. Operations and parts book
8. Tool Box / Service kit
|
| |
CHEN
SHENG MACHINERY INDUSTRIAL CO., LTD.
NO3, ALY 1, LN .198,SEC2,. SANFENG RD., FENGYUAN DIST., TAICHUNG CITY 420079, TAIWAN.
TEL:886-4-25221371 . 25228106 FAX:886-4-25241931 skype: chensheng07
|
