LS-635 series

LS-635T

• Backward tilting spindle
• Miter slot is standard
• Table area: 41-3/8" x 31-1/2" (1050 x 800mm)
• 7.5 HP, 3Ø/ 5 HP, 3Ømotor
• Electronic spindle brake

LS-635TS

• Backward tilting spindle with sliding table system
  Table area: 41-3/8" x 31-1/2" (1050 x 800mm)
  7.5 HP, 3Ø/ 5 HP, 3Ømotor
  Electronic spindle brake

INTERCHANGEABLE SPINDLES:
Choice of 3 spindle diameters- 3/4", 1", 1-1/4" or choice of metric sizes- 19mm, 25.4mm, 30mm. Spindle has MK5 taper to ensure precision fitting for the machines usable life, and guaranteed tolerance to 0.0008".

QUICK CHANGE SPINDLE SPEEDS:
The spindle is driven by four-speed pulley for spindle speeds of 3000, 4500, 7500 and 10000 RPM. Change of speed is quickly and easily accomplished by simply loosening a lock lever, and shifting the belt to the required spindle speed.

REVERSIBLE SPINDLE ROTATION :
The spindle is reversible to ensure safe rotation in clockwise or counter-clockwise direction as well as providing the ability of climb cutting panels.

SPINDLE RAISING:
The spindle is raised or lowered by a precision graduated handwheel, providing 1mm elevation per full revolution of the handwheel. Quick clamp lever positively holds spindle at a set height for guarantee of repitition.

ELECTRONIC SPINDLE BRAKE:
The electronic spindle brake provides instant stop of the running stop.

TABLE INSERTS:
The spindle is fitted with 2 insert rings (6-3/8" & 8-5/8") permitting for use of a wide variety of shaper cutters and spindle speeds.

FENCE:
The fence assembly is attached with a 4" diameter outlet dust hood. The fence halves can be precision adjusted by micrometric adjustment knob with 0.008" graduation.

TABLE:
The massive table is made from high quality cast iron, rib reinforced, and temper heat treated for maximum strength and wear resistance. Table surface is precision ground.

ROUTING OPERATION:
The MK5 taper on the spindle accepts a router collet system, providing maximum flexibility all in one shaping and routing machine.

SPECIAL BACKWARD TILTING SPINDLE

• The spindle can be tilted 45° backward and 5° frontward.
• The spindle is specially designed with backward tilting, allowing cutter to be mounted at a lower position for increased stability and safety.