| AUTOMATIC PLANER | LS-510 / LS-630 |
 |
SPRIAL CUTTERHEAD The series of planer is equipped with an oversized sprial cutterhead. This provides high chip removal rate, superior surface finish and extremely low noise while cutting.  manufactured
from alloy steel, the sprial cutterhead is precision machined, tempered,
dynamically balanced and precision ground. Fouredge tungsten carbide
knife inserts are fitted in the helical slots of the cutterhead. |
| Designed
to meet the requirements of the modern wood working industries for a thicknessing
unit at low cost. Its neat design and robust construction ensures a precision performance and the unit is in every respect simple to operate and easy to maintain. |
| HEAVY DUTY |
| SHOWN WITH OPTIONAL POWER |
| TABLE TRAVERSE |
FEATURES:
| FRAME |
Heavy welded steel. Extremely rigid and perfect alignment. |
| TABLE | Powered vertical traverse (on request). Accurately machined with extra heavy rib reinforcing for perfect alignment and maximum strength. Surface percision pround from a one-piece casting. |
| CUTTERHEAD | Safety type, milled slots from medium carbon steel, precision ground and balanced, fitted with 3 high-speed steel knives. |
| INFEED ROLL | Currugated,75 diameter rubber plugs equipped in cast iron sections mounted on milled steel saft. REVERSIBLE WITHOUT DAMAGE. |
| OUTFEED ROLL | Smooth, 65mm diameter. Solid type. |
| TABLE ROLL | Three, adjustable, 65mm diameter. |
| PRESSURE BAR | Cast iron spring loaded. Mounted concentric to cutterhead and fitted extremely near knife-cutting circle. Solid type. |
| CHIPBREAKER | Cast iron spring loaded, sectional-type, with independent 1/4" yield. Sections are mounted on steel bar just forward of the knife-cutting circle and swing concentric to the cutterhead. |
| POWER FEED CONTROL | 3 speeds pulley affords complete range of feed from 5-15 meters perminute. Driven with 1 HP totally enclosed motor mounted in machine base. |
 |
SPECIONAL INFEED ROLLS Currugated 75mm diameter. Rubber plugs equipped in cast iron sections mounted on milled medium carbon steel shaft. REVERSIBLE WITHOUT DAMAGE. |
 |
Each sections has independent yield of 1/4", necessary in running strip stock of varying thickness without dangerous kickback. |
 |
BELTED FEED DRIVE ASSEMBLY Is simple and trouble free. A combination of variable speed pulley, V-belts and heavy pitch gears provide smooth dependable feed rates. |
 |
KNIFE SETTING DEVICE Proper use of knife setting device will maintain equal knife height, assuring a smooth surface. |
| STANDARD EQUIPMENT | SPECIAL EQUIPMENT |
| 1. high
speed steel knives....................................3 pcs 2. knife setting device...........................................1 pc 3. Service spanners..............................................1 set |
1. Power
table traverse 2. Shaving hood. |
SPECIFICATIONS:
| MODEL | LS-510 |
LS-630 |
| Table area | 341/2" x 21" (876 x 534mm) |
371/2" x 25" (953 x 635mm) |
| Cutterhead | 4" (101mm) | 4" (101mm) |
| Cutting circle | 4 1/4" (107mm) | 4 1/4" (107mm) |
| Cutterhead speed | 4500 R.PM | 4500 R.PM |
| Number of knives | 4 | 4 |
| Feed rollers | 3" (75mm) | 3" (75mm) |
| Table rollers | 21/2" (65mm) | 21/2" (65mm) |
| Range of feed speed | 5 - 15 meters/min. (3 speeds) |
5 - 15 meters/min. (3 speeds) |
| Maximum depth of cut | 3/8" (9.5mm) | 3/8" (9.5mm) |
| Stock thickness range | 1/8" - 8" (3.2 - 203mm) |
1/8" - 8" (3.2 - 203mm) |
| Maximum width of stock | 20" (508mm) | 24" (609mm) |
| Cutterhead motor | 5HP | 7.5HP |
| Feed drive motor | 1HP | 1HP |
| Net weight | 550kg | 650kgs |
| Gross weight | 700kg | 800kgs |
| Packing dimensions | 44"x40"x53" | 48"x44"x54" |
| *Specifications subject to change without notice. | ||